|
The new 3350-HTPO Holding Tank Pump Out
Controller displays the holding tank level on a standard 2"
Panel Gauge.
The green START button manually starts the pump
out where and when allowed. The unit automatically stops the
pump out when the tank is empty to avoid the pumps running dry.
The user can also stop the pump out at any time by pressing the
STOP button.
The 3350-HTPO is fitted with a 10 amp relay to
control the pump out pump. The unit mounts in a standard 2"
diameter panel hole and the front and panel seal is to IP67.
It has a red LED lamp that flashes when the pump
out is in progress and a blue LED holding tank level display
that varies in brightness as the ambient light level varies.
It attaches to the NMEA2000® network using a single "Micro"
plug. It draws less than 150mA from the network.
The
3350-HTPO Holding Tank Pump Out Controller simplifies the
holding tank pump out procedure and protects the pumps from
being damaged by running dry.
To download the Product Datasheet
PDF click here.
To download the Installation &
Operation Instruction PDF
click here
|
