The Offshore Systems 3165 Rudder Angle Adaptor
allows standard European or American standard resistive rudder
angle senders to transmit their rudder position over the
The unit is designed to greatly simplify installation with NO
user setup or calibration required and NO display menus to
In multiple rudder installations the sender type selection and
the device instance setup is simply done with the small rotary
switch on the unit.
The 3165 has a red port LED and a green starboard LED that flash
to indicate the unit is transmitting the appropriate rudder
position. The mechanical setup of the rudder angle sender is
greatly simplified by setting the rudder midships and then
adjusting the linkage to the sender until both LEDs illuminate
when the sender is also at midships.
It comes with a 1 metre NMEA2000® cable and a 2 metre rudder
sensor cable to allow the unit to be placed in a convenient
location. It is fully waterproof to IP67 and ruggedly
constructed for years of reliable and accurate service.
The unit comes with a detailed User Manual and is certified to
the NMEA2000® network standard.
The 3165 is simple. powerful, reliable and very easy to install.
For a pdf of the product datasheet click